Job responsibilities：

1. Responsible for cost analysis of new projects, pricing of old products and DFM;

2. Be responsible for the management, follow-up and problem feedback of the corresponding customer's projects in NPI stage, and communicate with the customer on the project cooperation in the early product development stage;

3. Responsible for the production of engineering samples, mass production and design change data (BOM, product process route, deployment drawing, DFMEA, etc.);

4. Be responsible for the signing and approval of FAI data or technical acknowledgment required by customers at NPI stage.

Job requirements：

1. College degree or above, major in machinery, more than 3 years of relevant working experience, skilled in the processing technology of metal parts such as sheet metal;

2. Familiar with common office software (word, Excel, PPT);

3. Familiar with CAD, Pro-E, SolidWorks drawing software.

Job responsibilities：

1. formulate and be responsible for operation instructions;

2. improve on-site processes and processes, optimize resources and improve production efficiency;

3. assist in production line arrangement and optimize layout;

4. assist in designing various fixtures and fixtures.

Job requirements：

1. college degree or above, major in ie/ mechanical automation;

2. more than two years' relevant working experience

Job responsibilities：

1. advanced planning for new product quality, preparation of SIP and pre process control plan for assembly section products;

2. participate in sample trial production, participate in sample pre production meeting, review meeting after sample completion, preparation meeting for small batch trial production, and summary meeting after small batch completion. Conduct the first article inspection in the assembly section before the small batch trial production, implement the sample delivery inspection, and track the abnormal sample quality improvement;

3. customer standards and special requirements are transferred to relevant units such as quality inspection and production;

4. process quality abnormality handling (daily clearing and daily settlement), determination of disposal methods of defective products and implementation supervision and follow-up;

5. handling of customer returned products (daily clearing and daily settlement), determination of disposal methods of defective products and follow-up supervision and follow-up of handling implementation;

6. customer complaint handling, analysis and improvement report making and case closing tracking; Customer visit and audit reception; Assist in tracking customer design changes;

7. management of resident customer service personnel;

8. participate in the implementation of internal audit of quality system.

Job requirements：

1. junior college and mechanical related majors;

2. have at least 5 years of relevant working experience;

3. proficient in seven QC techniques, QCC and 8D;

4. master measuring tool operation skills, basic drawing knowledge, QC techniques, 5WHY analysis method, 5w2h application, and ISO9001 internal auditor;

5. be able to use AutoCAD software.

Job responsibilities：

1. new supplier evaluation;

2. production and revision of incoming inspection sip or inspection specification;

3. preparation and implementation of annual supplier audit plan;

4. handling and tracking of abnormal quality of incoming materials from suppliers;

5. weekly, monthly and annual quality performance statistics and analysis of suppliers;

6. supplier coaching;

7. Qc/ production staff quality inspection standard training.

Job requirements：

1. junior college and mechanical related majors;

2. have at least 5 years of relevant working experience;

3. proficient in seven QC techniques, QCC and 8D;

4. master ISO9001 internal auditor;

5. be able to use AutoCAD software.

Job responsibilities：

1. be responsible for the development of new projects for existing customers, including quotation, negotiation, annual price reduction, etc., strive for customer orders and implement business objectives;

2. hold the new project kick-off meeting, track the production progress of the new project and deliver the goods in time;

3. handling of major delivery quality problems and reconciliation and invoicing of sample orders;

4. accounts receivable follow-up;

5. long term inventory disposal of finished products.

Job requirements：

1. college degree or above;

2. more than 5 years of project management experience, and more than 3 years of working experience in sheet metal industry is preferred;

3. be familiar with marketing related knowledge, master trade related knowledge, understand simple mechanical drawings, and be able to do cost analysis;

4. strong communication skills, serious work, able to withstand pressure;

5. proficient in English listening, speaking, reading and writing.

Job responsibilities：

1. Be responsible for the order share of the assigned customers, strive for and implement the business objectives;

2. Order analysis and entry, and timely delivery of goods;

3. Timely reconciliation and invoicing;

4. Accounts receivable follow-up;

5. Long term inventory processing of finished products.

Job requirements：

1. College degree or above;

2. At least 1 year working experience in manufacturing or foreign trade is preferred;

3. Strong communication skills, conscientious, able to work under pressure;

4. CET4 in English is preferred.

Job responsibilities：

1. New project initiation and intervention, new material sourcing development: develop, evaluate and select suppliers according to supply chain strategy, procurement procedures and management system, compare and evaluate prices according to market conditions, reduce procurement costs through various ways, and provide reasonable cost targets that meet the requirements of the company;

2. Implementation of new project plan: order new project materials and track the progress to ensure that there is no shortage of materials in the sample stage of the project; Material progress and various abnormal handling;

3. Project material change: for material change in the sample preparation stage, timely assist the project to complete the switching between new and old materials, and ensure the supply of materials as a change window; Confirm and countersign the samples of the purchased new materials;

4. New project risk identification: new project stage, project progress, material cost, material quality and risk management;

5. Cross department communication to ensure material selection, cost, quality and progress goals are achieved;

6. When a new project is transferred to mass production, all new material system codes and unit price approval processes are incorporated into the system. Handover with mass production procurement to ensure smooth mass production procurement. Promote the improvement of mass production materials in case of significant quality and abnormal delivery date.

Job requirements：

1. Bachelor degree or above, more than 3 years of purchasing experience, more than 1 year of project work experience;

2. be familiar with the basic price components of materials, understand the market status of materials and the general process processing technology;

3. Good communication skills, teamwork ability, professional quality, strong sense of responsibility and dedication.

Job responsibilities：

1. assist in the formulation, implementation, verification and summary of equipment technical scheme according to the work plan;

2. according to the contents of the order, assist in the production of product flow chart and concept map, and complete the production, inspection and issuance of assembly drawing, part drawing and other drawings;

3. according to the design drawings, assist in the production of product BOM, release and ensure the accuracy of BOM;

4. be responsible for the development of some new functions according to the new product development plan to ensure that the functions meet the business requirements and the performance is stable;

5. assist in the trial production, testing, evaluation and confirmation of product samples according to the design requirements;

6. assist in improving the processing technology and design method according to the difficulty of production and processing;

7. according to the actual needs, assist to complete the remedial treatment of abnormal matters, complete the design optimization that helps to improve the production efficiency and quality, and provide after-sales technical support.

Job requirements：

1. college degree or above, more than 2 years of relevant industry experience;

2. be familiar with the principle of mechanical design and understand the fundamentals of fluid mechanics, mechanics and automatic control;

3. familiar with common office software (word, Excel, PPT) and the company's existing 2D and 3D drawing design software;

4. be familiar with the design concepts and methods of various wet process chemical equipment or automation equipment; Master PDCA, 5W1H, 8D and other working methods to analyze and solve problems; Be familiar with motion control and process control, be able to put forward control design suggestions, and have relevant project experience.

Job responsibilities：

1. Complete the material selection and design scheme of the project;

2. Complete the circuit diagram, track the production and commissioning progress;

3. Complete BOM;

4. Complete the project related forms;

5. Complete estimated bill of materials for quoted items

6. Complete the circuit diagram and bill of materials of after-sales projects;

7. According to the actual situation, provide after-sales technical support and complete the implementation of after-sales work orders;

8. According to the actual situation, complete the on-site tracking of equipment operation, analysis, handling and improvement of abnormal problems.

Job requirements：

1. Bachelor degree, major in electrical engineering and automation;

2. At least 3 years working experience in non-standard equipment industry, proficient in the design concepts and methods of various wet process chemical equipment and automation equipment; Understand the working principle and control method of PLC, frequency converter, servo motor and stepping motor; Master AutoCAD drawing software and Microsoft office software;

3. Strong communication skills, good English listening, speaking and writing skills.

Job responsibilities：

1. Complete software design, code writing and archiving;

2. Complete the design, development, testing and optimization of new product software and new function modules;

3. According to the order installation plan, complete the on-site software debugging of service sales;

4. According to the commissioning status of each project, find and solve the defects in the test, analyze the causes, and optimize the promotion;

5. According to the actual production demand, optimize the software code to achieve the goal of simple operation and stable state;

6. Summarize and develop general control mode according to customers' usage habits;

7. Assist in organizing and implementing personnel training according to the annual training plan;

8. According to the actual project needs, cooperate with the sales and service department to adjust the software of the newly installed products and track the on-site operation;

9. According to the actual order status, cooperate with production, quality, and other departments to assist the smooth completion of production work.

Job requirements：

1. Bachelor degree, major in electrical engineering and automation;

2. At least 5 years working experience in related industries and at least 2 years management experience; Proficient in Siemens series (TIA, winccflexible, WinCC); Familiar with mechanical structure of conventional electromechanical system; Proficient in motion control and process control;

3. Project management experience and team management experience are preferred;

4. Low voltage electrician certificate is preferred

Job responsibilities：

1. Implement the work instructions of the Department Manager and the superior supervisor, and complete the job responsibilities and production task requirements of CNC, plastic welding, assembly, machining, piping, spraying, welding, bending and other posts;

2. Do a good job in the maintenance and storage of machine equipment and working instruments, and cherish their use;

3. Implement 5S and safety production requirements in the work area to ensure normal production order;

4. Go to and from work on time, and abide by the company's safety operation regulations and other rules and regulations.

Job requirements：

1. Technical secondary school or above, relevant working experience is preferred;

2. Hardworking, not afraid of difficulties, serious and responsible, strong execution.